Fully enclosed dual axle Trailer for sale

Fully enclosed dual axle Trailer for sale

8 metre floor unobstructed area.

2.1 metre wide at rear (overall measurement).

Suit dragster or altered.

Front half of trailer lined inside with White glossy sheet.

Sponge quality vinyl flooring to match table and cupboard laminex (grey speckle).

Outside covered in Colorbond Panel Rib, Off White colour.

Inside standing room height is 1900.

Gap between wheel boxes for front axle clearance is 1120.

 

Front 'ensuite area';

- Argon bottle (small size included) and trailer holder.

- Tig inverter, helmet, wire all in custom box (1 hour usage at track only).

- Oil drum allocation area w/tie downs.

- 2 step ladder, mounted.

- Broom and mop holder.

- Pro Jax quick disconnect padded holders.

- Fini (Italian) direct drive compressor w/2 x 25 litre tanks mounted out of sight.

- Spare wheel mounted with new tyre (2 spares included.  4 new tyres at Easter, 8 ply light truck).

 

Main body of trailer;

- 7 double power points throughout w/circuit breaker and earth leakage.

- Fold down table and seating for 4 people. Folds up against wall in seconds enabling more floor area.

- Oil tray holder (2 locations).

- 2 windows with venetians, adapted to suit.

- Plenty of overhead storage in front half of trailer alone. Storage containers included.

- Microwave oven mounted on custom shelf.

- Granite pattern (grey speck) laminate on table and counter top.

- 4 large sliding white glossy coated doors under counter for lots of storage.

- Gasket tray mounted under top shelf, not noticeable.

- Dragster/altered rubber re-locatable wheel chocks on floor.

- Oil container shelf, complete with 4 oil containers.

- Fuel container shelf with 6 black fuel and 2 blue fuel churns.

- Third shelf for larger items to be stored (spare heads etc.).

- 6 under shelf (in rear) slide brackets for grab boxes (also included).

- Rear overhead storage area.

- 2 large and long fold up benches in rear, perfect for track work.

- 6 plastic tables mounted in custom brackets, including the tables.

- 2 special tie down straps for slicks, to cover a wider pattern for holding down.

- Eze-Up shelters, 3 stored in rear and 2 in front, with quick load-unload (including the awnings themselves).

- 4 fold up body trestles pit pinned to wall mount.

- 1 spare 17 inch dragster tyre/wheel (as when you have one, you will never need one...).

- CD-Radio unit.

- Custom tension wrench holder for 3 wrenches.

- 20 litre water tank for washing hands, including soap dispenser mounted to tap.

- 2 x 3 drawer Teng tool boxes mounted for spares or tools.  Virtually new.

- 2 aluminium cases for electrical or tuning spares, mounted in sliders.

- Checker plate step and checker plate in certain wear areas on floor.

 

Pit box on trailer side;

- 7 drawer Teng tool box, mounted.  Virtually new.

- Small fluro light with remote switch.

- Plenty of shelves in pit box for aerosol cans, tins, etc.

- 'Record' brand vice mounted for quick access and removal.

 

Outside trailer;

- Sunraysia white 14 x 6 Ford wheels.

- 8 ply truck tyres all around, 4 new tyres for Easter.

- 4 wheel electric brakes

- Lowered axles (factory made) 100mm (4 inches).

- Handbrake.

- Winch on front drawbar for loading/unloading of vehicle.

- 2 exterior spotlights (concealed into trailer wall).

- 1 x 240 volt exterior power outlet.

- Drop down tailgate, checker plate covering with flap for loading/unloading.

- Digital side clearance lights.

- Extra large rear tail lights mounted horizontal in custom made channel.

- Large diameter faced rivets were powder coated before use, which can hardly be seen.

- Swing forward access to door to ensuite of trailer.

- 2 Custom made roller doors put in side of trailer for access, no out swinging doors to get in the way.

- 2 Fire extinguishers mounted.

- 8 litre hot water urn.

- 240 Volt caravan inlet.

- Once piece aluminium roof, NO leaks what so ever!

- Spats w/quick release mounts cover wheels (can be used with or without spats).

 

Trailer looks fast just sitting there, not like a butter box on wheels- it has tapered bat wings from the front of the trailer to the wheel box area, then they taper up again to the rear of the trailer, making the unit look lower than it actually is. The wheel spats help immensely with the streamlined look.

 

* Possibly done 6000 klms in 6 years, definitely no more.

* Registered in Victoria till January 2014.

$19k.

Pics available.


SOLD and DELIVERED!

 

DSC00943_medium
Portland-Ringwood-Bollards-etc 040